Heat insulation of any surface Insulating paint

Isollat-04

Description

White insulation paint.

Packed in buckets: 5 / 10  / 19 liters

Purpose

Isollat-04 insulating material based on silicone is designed for insulation of high temperature surfaces.

Isollat-04 can be easily used within temperatures from +5 to + 700ºС 

Applications

    • heat insulation of steam pipes;
    • heat Insulation of chimneys;
    • heat Insulation of flues;
    • heat insulation of industrial equipment.

    Preparing Isollat-04 liquid-ceramic coating for application:

    • before each use, or after interrupting work, the coating should be thoroughly mixed (it is better to mix coating until homogeneous cream-like consistency). In order to avoid destruction of hollow ceramic beads, the stirring speed should not exceed 150 revolutions per minute);
    • it is not recommended to dilute Isollat-04.

    Preparing surfaces for applying Isollat coating:

    Before applying Isollat-04 coating, the surface should be cleaned from all possible dirt and old coatings. After that the surface should be degreased.

    Recommendations for applying Isollat-04

    • The first coating layer of "Isollat 04' should be applied with thickness of 0.3-0.5 mm, after that the surface should be wrapped with fiberglass reinforcing mesh 2*2 or 4*4 mm. Drying time is 24 hours at temperature not lower than + 8 C.
    • Subsequent layers should be applied on a similar principle to reach the desired total thickness of the coating.

    After work, thoroughly wash brushes, spray guns with water.

    ATTENTION: for more effective insulation, Isollat-04 is used together with glass tissue IPS-T-1000.

    When working with Isollat-04, the following should be used:

    • breathing mask ZM 7500;
    • chemical goggles;
    • chemical gloves and protective clothing.
Pictures
of
objects
Pictures
of
objects
Pictures
of
objects
Pictures
of
objects
Pictures
of
objects
Pictures
of
objects
Pictures
of
objects